GD427 MK IV

GD427 MK IV
What my car should look like when finished - Stoneleigh 2015

Thursday 5 May 2016

Driveshafts

I have now half fitted the rear driveshafts.  I filled the CV joints with CV joint grease before fitting them to the diff and hubs.  The bolts supplied for the hubs were of the incorrect thread pitch, so I have had to order some M8x50 High tensile bolts. I temporarily fitted some standard bolts just to hold it in place.

The bolts to the diff were correct and tightened up.




No comments:

Post a Comment