GD427 MK IV

GD427 MK IV
What my car should look like when finished - Stoneleigh 2015

Friday 12 August 2016

Transmission Tunnel Cover

I used a piece of card to work out exactly where to put the cut out in the transmission tunnel cover for the gear lever.  I used a 60mm hole saw for the hole (Ends up being around 62mm once drilled).  This is large enough to prevent the lever from touching the cover when in any gear while stationary, and hopefully even when driving!  I will bolt the cover in place once I have finished modifying the handbrake cable.  The cable needs to be shortened and will be easier to work with without the cover being bolted in.



No comments:

Post a Comment