GD427 MK IV
What my car should look like when finished - Stoneleigh 2015
Wednesday 28 June 2017
Side Repeaters
I finally fitted the side repeaters by drilling a 20mm hole. I used the front line of the side vents to project a line up to the front edge of the repeater and 15mm up for the bottom edge. These were pushed in through the hole and wired up with a 2-way superseal connector. I will remove them and seal them with some sealant for a permanent fix.
Subscribe to:
Post Comments (Atom)
Well that answers the first of my questions... Which repeaters are GD using now the others aren't available! Do they bolt in or are you using sealer to hold them in?
ReplyDeleteAndy, these are coloured LED repeaters and they are just a push fit. I will apply some sealer to assist in holding them in place.
ReplyDelete